Draw lines on the Simple pinafore draft as shown in the figure (pink dotted lines) For simple pinafore dress draft please refer
Vani's blog: Simple pinafore dress
Bib -Cut along UNMI (IU on fold) ---2 pieces
Waist band- Cut along U’N’OV (U’V ‘on fold width U'V’ being double the width UV in the skirt)—2 pieces
Back skirt - Cut along VOHB (VB on fold)
Front skirt – Cut along VTPHB (VB on fold)
Pocket layer 1 - Cut along STOPQRS
Pocket layer 2- Cut along STPQRS
See the different parts in the figure.
While cutting on the material leave ½” all around except for the sides for seams
Stitching
Skirt front -Keep pocket layer 2 on skirt front, right sides together along the curve TP .clip at 2 or 3 places .turn the pocket layer inside and press.
Keep and pin the skirt front on the right side of the pocket layer 1 such that points TSRQP Match (consider all the three layers-Skirt front, pocket layer1 and pocket layer 2).Stitch pocket layer1 to pocket layer 2 along the line SRQ Baste the pocket to the skirt along the line ST and PQ.Other side of the pocket is also stitched in the same manner.
Stitch the Waist band along VO to the skirt front keeping wrong side of the skirt and the right side of the band together. Press .Fold ½” along the line U’N’ and again fold to the front and stitch to the right side of skirt along the line VTO. Waist band is attached to the skirt back in the same manner.
Bib- Bias bind arm hole and neck line .Attach bib to the waist band keeping the waist band ½” above the line UN of the bib
Stitch the sides of the skirt together
Shoulder straps –Fold ½” and stitch along the length of the shoulder strap. Attach them to the front and back of the bib. stitch the bottom hem by folding 1". Finally top stitch as in the dress.( Please note that draft is not to scale)