Materials needed Materials suitable are Cots-wool, flannel and flannelette Matching piping Pattern making Fold the paper in 2 layers and prepare the draft. A-P = full length +½” A-B =¼ chest –½” Draw perpendiculars from A, B and P A-C =½ shoulder A-G = back neck=½” A-H = front neck = 1½” A-F =¹/12th chest Join F-G and F-H with curves Mark S on the line A-P such that P-S =1½” A-C =B-D. Produce B-D to E such that B-E =¼ chest +1½” C-M = Full sleeve length measured from shoulder tip to wrist +⅛”Draw a perpendicular from the point M to the line A-M. M- N =A-B M-U = sleeve width +½”. M-O =½” Join U-O with a curved line as shown. Produce P-Q to R such that such that R-Q =1½” Join R –E. Mark T on R-E such that R-T =1”. E-V=¾” join U-V-T as shown. Join T-S with a curve as shown Cut along the line O-U-V-T-S. Cut back neck A-F. Open the fold and cut front neck F-H Cutting the fabric Place the draft on the material as shown in layout 1 or layout 2. Cut front opening H-S Stitching Finish the sleeve with matching piping. Join the sides. Over cast the seam or pink the seam and open. Finish the curved line T-S and front opening together at one stretch with piping. Finish the neck with piping Leave extra piping on either side of the neck for tying a bow. Or you can stitch button and loops (Type 2)
Hi vani I have a doubt, no need to cut the sleeves seperatly? I will try this for my daughter.very pretty .looks easy. thanks for sharing.
Vani your tutorials for jacket is fantastic , I can try out immediately:bowdown:bowdown:bowdown thank you so much vani sis