Embroidery : Aari Work - Neck Design

Hi,

It looks Great & Neat.

Cheers,

Chithra Sekar

 

its nice...keep it up and keep posting,

 

Zardosi

Hi Friends,

I want to understand Zardosi work. I tried to google but cud not find much information. Then a thgt struck that IL has some very very friendly experts in this field & I can seek their expert advises here.

I want to know if the metal spring has to be cut before it is woven into the fabric according to the desing or it shud be woven first and then cut as desired & required by the design. bonk

Awaiting your valuable advises:coffee

 

Re: Zardosi

Hi MadhuRao,

>I want to know if the metal spring has to be cut before it is woven into the fabric according to the desing or it shud be woven first and then cut as desired & required by the design.

It can be done both ways. Generally small bits cut as required (length) and use aari needle or ordinary needle to sew on the pattern or the zardosi (long length pattern) can be sewn without cutting until desired length and then cut later. Hope that was helpful :hiya

 

Re: Zardosi

Thanks Vasthraa for taking time to reply and for the advise. I will certainly try this out over the weekend and keep u posted.


Thanks again,:cheers

 

Re: Zardosi

Hi Vasthra,

Thanks a lot.I too had the same doubt and now that it is clear.

Smitha

 

re: Embroidery : Zardosi (Zardozi) instructions

Hi Vani,

These are crisp and clear instructions. I am sure for a beginner, this is wonderful.
Can you post the picture of the needle as well? This will be useful.

Cheers,
Sunitha